GC Green Silicon Carbide Micropowder for Precision Lapping of Glass-Ceramic, Effectively Reducing Edge Chipping and Microcracks

GC Green Silicon Carbide Micropowder for Precision Lapping of Glass-Ceramic, Effectively Reducing Edge Chipping and Microcracks

 

Glass-ceramic is a typical hard and brittle material with special thermal stability and high sensitivity to subsurface damage. In the precision lapping process of substrates and optical components, edge chipping, microcracks and deep damage are key pain points restricting yield. With excellent crystal properties, GC green silicon carbide micropowder has become the mainstream abrasive solution for glass-ceramic fine lapping.

 

GC green silicon carbide features high purity and sharp crystal edges with outstanding self-sharpening performance. During lapping, abrasive grains cleave uniformly along the cleavage plane and continuously form new cutting edges without rounding and slipping quickly. It delivers gentle and controllable cutting action and avoids impact scraping, greatly reducing edge chipping and propagating microcracks inside workpieces, lowering the thickness of subsurface damage layer and laying a solid foundation for subsequent polishing.

 

✅ Core Advantages

  • Good self-sharpening performance and stable cutting to reduce impact damage and restrain edge chipping and microcracks
  • Fast heat conduction and low thermal expansion to lower lapping thermal stress and prevent thermal cracks
  • High purity and low iron content, less likely to cause contamination stains, suitable for optical glass-ceramic
  • FEPA / GB standard particle sizes, complete W-series micropowders for separate selection in coarse and fine lapping
  • High chemical inertness, compatible with water-based lapping slurry, acid and alkali resistant for stable slurry system

Physical properties of Green silicon carbide

1.Color:Green

2.Hardness: Knoop2600

3.MohsHardness: 9.4(min)

4.Specific Gravity:3.2 g/cm3

chemical composition of Green silicon carbide

1.SiC: 98.5%-99.5%

2.Fe2O3: 0.05-0.1%

3.F.C:0.1-0.2%

Micropowder/burnishing powder/polishing powder of green silicon carbide 

FEPA Standard: F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000 F2500 F3000

JIS Standard: #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000

Scroll to Top